HomeLIFESTYLEHow to make burnt cement?

How to make burnt cement?

Want to learn How to make a burnt cement effect🇧🇷 After all, what are the techniques used to achieve the effect of burnt cement on the wall? And on the floor, how to do this type of technique on a dry subfloor?

In short, the construction, in general, gives us a series of unique and natural effects that can be used later in the decoration of the place. For example, the burnt cement effect is one of those that can be done when finishing a construction area, bringing even more beauty to that space.

In addition, it is essential to emphasize that the industrial style is increasingly in fashion. Whether for a residential or building construction, the decoration of this type gains more space, with details for apparent hardware, yellow lights and rustic details such as the burnt cement effect itself.

So, in today’s content, we are going to teach you how to how to make burnt cement effect🇧🇷 In this way, it is possible to apply it to the construction that is being carried out, in countless different ways. Check out!

What this article covers:

How to make burnt cement effect?

First of all, in construction, there is not only one way to implement the burnt cement style, but different ways to use burnt cement in decoration. Therefore, we have created a small guide that can help you in each of these situations.

How to make burnt cement effect on the wall?

After all, how to make the burnt cement effect on the wall? First of all, this is one of the regions of the house where the burnt cement effect is most combined. Since that’s where the industrial style best expressed. In addition, it is worth remembering that in terms of decoration, it is more interesting to leave only one of the walls of a room with this effect.

Start by choosing the burnt cement shade you want. So, for that, we will use ready-made paints that can achieve the desired style. Then, have all these materials at hand:

  • Paint chosen to make the burnt cement effect;
  • Masking tape to cover all sockets and baseboards or wall frames;
  • If there is already flooring in place, then use a tarp to cover the floor;
  • fine sandpaper;
  • Ladder to reach higher places;
  • Bucket and sponge to clean the wall before painting;
  • Rounded corner stainless steel trowel.

With all the materials in hand, let’s get started:

  • Be sure to secure all locations with tarpaulin and masking tape;
  • If they are dirty, the walls should be cleaned with a sponge and degreaser;
  • Apply the first coat of paint, a thin coat to begin with. Movements must be random to check for the correct style;
  • Wait the necessary time for the second coat, usually stated on the package. The second coat should be a slightly thicker layer, but still repeating the random movements;
  • If necessary, apply another coat the next day and that’s it, your wall has a burnt cement effect.

How to make burnt cement effect on the floor?

Did you know that you can also do burnt cement on the floor? We are talking about techniques used to create the effect on a floor that will be finished with a direct finish on the subfloor. That is, in these cases, tiles, porcelain, or anything like that are not used. So, you will need:

  • Thin sand;
  • brush;
  • Cement;
  • Steel trowel;
  • Hoe;
  • Expansion joints;
  • acrylic resin;
  • Aluminum ruler.

Now, check out the step-by-step guide to create a burnt cement effect on the floor:

  • Clean well the place where you will make the burnt cement effect. If it is directly on the subfloor, it is extremely important that it has been cured for at least 14 days. Also, fix any imperfections, otherwise the burnt cement will not be level;
  • Then it’s time to apply the acrylic resin in place. The role of the resin is to guarantee greater adhesion of the liquid cement that will be used to guarantee the effect. Therefore, apply twice, with enough time between one application and the other for the first to dry;
  • Is the place where you are going to apply the effect not flat? In this case, mix some cement powder with water and do the leveling work in its smallest details;
  • Wait for it to dry and pass a broom on the spot to remove excess cement dust;
  • Now, just apply the liquid cement. In terms of quantity, 1kg of cement is needed for each square meter, for a surface of 1mm, the most suitable being between 3mm and 4mm;
  • Spread the floor with the help of a bubble stick, always trying to make it uniform and level;
  • Finally, apply the acrylic resin again to seal the entire floor that was recently applied.

How to make a burnt cement effect with putty?

Finally, using racing putty to make the painting of an environment look more professional is an old technique, but did you know that it is also possible to learn how to make a burnt cement effect with putty? In that case, you will need:

  • Water;
  • trowel;
  • Spackling;
  • Pigment to give life to a color similar to that of cement;
  • And sand.

Practical step by step:

  • Mix pasta with water;
  • Then apply the pigment in the chosen color;
  • Finally, apply the mixture to the wall and use the trowel to correct imperfections;
  • It is recommended to apply two coats of the application, with a space of time between 4 to 6 hours between one coat and another.

Want to save on your decor? Access and buy Mass Race in Promotion and change your environment by paying less!

So, what did you think of the tips on how to make cement? Leave it in the comments.

Must Read