HomeLIFESTYLEAluminized Asphaltic Blanket: Price

Aluminized Asphaltic Blanket: Price

THE aluminized asphalt blanket It is one of the most used technologies in terms of civil construction. In addition to waterproofing the place where it is applied, it reflects the sun’s rays, lowering the internal temperature. It can also be used to stop leaks and leaks. Made from modified asphalt and reinforced with a very dense polyethylene or polyester film, it has a layer of aluminum on the weather-exposed face, which reflects ultraviolet rays and resists ozone, dispensing with mechanical protection.

What this article covers:

Aluminized Asphaltic Blanket: Price

This asphalt blanket can be applied in places where there is no traffic and with little movement of the structure such as roof slabs, domes, gutters, roofs, marquees, retaining walls, swimming pools, water tanks or sheds. There is varias brands of aluminized asphalt blankets on the market and therefore their prices vary greatly. Check the average prices found:

Vedacit Aluminum Asphaltic Blanket 3mm in roll for 10m²: R$178.00

Vedacit Asphaltic Blanket with Aluminum for covering roofs 1m x 10m: R$165.00

Asphaltic Mat with Aluminum Flex Primer 2.7mm in a 10m² roll: R$165.00

Asphaltic Blanket with Aluminum in Polyethylene Primer 2mm: R$3.94 per square meter

Asphaltic Blanket with Aluminum in Polyethylene Primer 3mm: R$4.90 per square meter

Asphaltic Blanket with Aluminum in Polyethylene Primer 4mm: R$5.86 per square meter

Asphaltic Blanket with Aluminum in Polyester Primer 3mm: R$5.63 per square meter

Asphaltic Blanket with Aluminum in Polyester Primer 4mm: R$6.57 per square meter

Asphaltic Blanket with Aluminum Anti-Hail Primer 3mm: R$6.28 per square meter

Asphaltic Blanket with Aluminum Anti-Hail Primer 4mm: R$7.44 per square meter

Asphaltic Blanket with Aluminum Anti-Hail Primer 3mm: R$6.28 per square meter

Ciplak Aluminum Asphaltic Blanket for cracks, tiles and slabs 45cm x 10m: R$139.99

Sika Aluminum Asphaltic Mat for 3mm slabs in a 10m² roll: R$205.90

Sika Aluminum Asphaltic Mat for 4mm slabs in a 10m² roll: R$239.90

Viaflex Aluminum Asphaltic Blanket in a 10m² roll: R$136.90

Asphaltic Blanket with Aluminum Drykomanta in a 10m² roll: R$99.00

Asphaltic blanket application

The blanket should only be applied by specialized people, as it requires knowledge of civil construction and handling torches. Therefore, before buying the asphalt blanket, check the installation prices, which can vary greatly from one company to another. O site waterproofing process starts with the endorsement of a Civil Engineer, who will study the structure of the building to indicate the places that should receive the covering of the blanket.

To apply the product, the surface must be prepared, completely clean and free of dust. Afterwards, it is humidified so that it can be smoothed with cement and sand mortar. to level the waterproofing in addition to the efforts foreseen, it is necessary to leave a space of 40cm x 40cm by 1 cm deep under the drain. All corners and edges must be rounded.

Then, place a diluted asphalt solution in organic solvents to help with adhesion and impermeability. The surface must rest for 8 hours. Then, the blankets can start to be aligned, always from the drain to the highest parts. In order for the product to be completely stuck in place, the layer of non-stick polyethylene or polyester must be melted with the torch flames. The seams must be at least 10 cm and will need to be beveled so that the seal is perfect.

To test whether the site is really impermeable, a water column of at least 5 cm must be left for 72 hours. If it is approved, it remains to paint the joints and ends with a aluminized asphalt paint with a small foam roller. Thus, the finishing and protection of the blanket will be complete.

Must Read